Epson 73c - Manual (Page 24)

18 Setting Up the Projector
Connecting a Component Video Cable
If your video source has component video connectors, you can use
them to project a higher quality video image. However, you’ll need a
component video cable, which can be purchased from EPSON
(ELPKC19).
Before starting, make sure the projector and your DVD player or
other video device are turned off.
1. Connect the large end of the component video cable to the
projector’s Computer/Component Video port.
2. Insert the three ends of the component video cable into the R , G ,
and B ports on your video source.
3. Connect the audio plugs on the RCA A/V cable as described on
page 16.
4. After you turn on the projector, use the Video menu to set the
Input Signal to YCbCr or YPbPr . See page 40 for more
information.