Epson 73c - Manual (Page 53)

Fine-tuning the Projector 47
3. Press Enter to select the Advanced menu.
4. Use the directional buttons and Enter button to set the following
options:
■ Language
Select from nine languages to be used for the projector
menus.
■ Brightness Control
Select a Low lamp brightness setting when you need to
reduce fan noise for your presentation. When you select Low,
the projector starts up using High brightness for two minutes,
then switches to Low.
■ Startup Screen
Turn on to display the image or logo you have captured
whenever the projector starts. See page 43 for more
information.
■ Color Adjustment
Color Temp: Adjusts the whiteness of the screen.
RGB: Adjusts the individual RGB values.
■ Rear Proj.
Turn on to project from behind a transparent screen.
■ Ceiling
Turn on when the projector is mounted upside-down from
the ceiling.
■ COM Port
Turn on USB when you’re controlling the projector from a
computer with the EMP Link 21L software. This software
can be downloaded from the EPSON website at
support.epson.com. (You must turn the projector off and
then on again to use the new setting.)
5. When you’re finished, press Esc or Menu .
note
The USB and remote control
mouse features do not work
when COM Port is set to
USB.