Options under the paging model, Options, Under the paging model – Grass Valley NV9641A v.1.0 User Manual
Page 33
23
NV9641A
User’s Guide
•
Flip-flop source to preset after take.
Swaps the preset source and the currently routed source for this destination.
•
Enable force release.
Allows operators to execute a force release.
•
Jump back after source selection.
After you make a source selection, the panel reactivates the default button page.
•
Jump back after take.
After you press a ‘Take’ button, the panel reactivates the default button page.
•
Jump back after destination selection.
After you make a destination selection, the panel reactivates the default button page.
Jumping back to the default page is usually helpful, but in some configuration designs,
might not be. You can design your panel configuration to take advantage of the jump-
back behavior.
•
Src/dst immediate take.
A ‘Source/Destination’ button selects a source and a destination. When this box is checked
(as it is in the default NV9641A configuration) the button performs an immediate take. When
the checkbox is clear, the button sets up the take and the operator must press a ‘Take’ but-
ton to complete the take.
Options under the Paging Model
This is the panel options section, as it appears at the right of a configuration page under the
paging model: