Grass Valley T2 Classic iDDR - Manual (Page 104)

104 T2 Users Manual –SP3/SP4– October 17, 2011
Chapter 6 Additional/Updated Functions for SP3 and SP4
Automatically loading sources that can be loaded to the P1/P2
channel
You can set T2 to automatically load sources that are being recorded in the R1 channel
to the P1/P2 channel when they become loadable.
1. Click Config. , and then click Video in the "P1" tree or the "P2" tree.
2. Check Automatically mount a clip being recorded on the player, when it’s
ready for playback.
NOTE: To load sources that are loaded to the P1/P2 channel automatically, also
check Auto Play in "Auto play mode:".
3. Click OK .
CAUTION: This function is disabled in the following conditions:
- The specified channel is locked or the 3D sync mode is set to on
- The specified channel is in the Fill/Key output mode
- The specified channel is in the remote mode (except when the local operations are
enabled in the remote mode)
- 1Out restricted clip is loaded to the other channel