Grass Valley T2 Classic iDDR - Manual (Page 48)

48 T2 Users Manual –SP3/SP4– October 17, 2011
Chapter 4 T2 GF Option
3. Click Option in the menu bar, and then click Remove Device...
4. Select a drive, and then click Remove .
5. Click Yes , and then remove GFPAK.
Workflow using GF
Playing sources in GFPAK
You can load a file that is saved in GFPAK to your T2 and play it back.
1. Connect GFPAK to your T2.
• The drive name is added to the GF node in the Browse tab, and the clip list is
displayed.
CAUTION: If the GFPAK node is not recognized automatically, click ... in the
Browse tab, select the drive on the "Browse For Folder" dialog box, and then click
OK .
2. Right-click a clip, and then click Load to P1 or Load to P2 .
• You can also load a clip by dragging and dropping it onto the P1/P2 channel or
double-clicking it after selecting a channel.
3. Click Play for the channel to which you loaded the clip.
CAUTION: Although In and Out points can be configured, importing only the part
between In and Out points is not available.