Grass Valley T2 Classic iDDR - Manual (Page 125)

October 17, 2011 T2 Users Manual –SP3/SP4– 125
Operations in the front panel mode
2. Select Slave mode , and then tap Close .
• T2 on the sync destination (slave) is set to the slave mode.
• To synchronize data to multiple T2 (slave), perform steps 1 and 2 on all T2
(slave).
Setting T2 on the sync source (master) to the master mode for data sync
1. Tap Menu , and then select Tools T2 to T2 Sync backup...
• If you are capturing or loading clips in the R1/P1/P2 channel, a message appears
asking whether to unload clips. Tap OK to unload clips.
• The "T2 to T2 Sync backup" dialog box appears.
2. Select Master mode , and then tap Slave configuration...
• T2 on the sync source (master) is set to the master mode.
• The number of T2 set to the slave mode is displayed in "Slave count:".