Grass Valley XtenDD DD - Manual (Page 146)

7. Initial Installation
7 - 16 Planning and Installation - Rev. 3 / 04.2005
7.4.1.1 Mounting the Input Processor Board RY 3040/41
The special design of the plug contacts on the Input Processor Board RY 3040/41
requires lots of power when mounting. By means of the PCB Assembly/Insertion
Tool, board RY 3040/41 can be easily and safely plugged into the mainframe. For
this purpose, put the two insertion tools over the locking levers of the board, insert
the hooks at the upper and lower guide rail of the casing (see below) and press the
levers down until the board has completely locked in.
Example SH-1/2/3/4-BM mainframe:
Inserting the PCB Assembly/Insertion Tool
Inserting the Input Processor Board RY 3040/41