Grass Valley XtenDD DD User Manual
Page 152
7. Initial Installation
7 - 22
Planning and Installation - Rev. 3 / 04.2005
Pos.
Function
Factory adjustment
G4
G7
G8
G9
G11
G12
MP9
MP10
MP11
MP12
MP13
MP14
MP16
MP17
LED green:
LCA configuration o.k.
LED yellow:
-5V supply (VEE or VEE1) down
(on board DC/DC converter)
LED yellow:
synchonization error display - should be off.
LED green:
serial SDTV serial digital input detected.
If flashing, valid input detected but not selected.
LED green:
serial HDTV serial digital input detected.
If flashing, valid input detected but not selected.
LED green:
Analog reference input detected (for example
black burst).
FCTRL:
Frame pulse for Controller Board
V:
Vertical pulse (low: active video lines)
F:
Frame pulse to video boards (low: field 1)
/BLD:
Bank load, Controller sync for parameter
update (active low)
TPD:
Frame signal
TPC:
Vertical signal
TPB:
Horizontal signal
TBA:
Clock signal
Genlock internal signals: depend on TV standard
depend on signal connected to
sync on input