Grass Valley XtenDD DD - Manual (Page 40)

4. Installing Control Panels
4 - 2 Planning and Installation - Rev. 3 / 04.2005
D Software package:
Mouse
CD-ROM HD35 software
CD-ROM Intel PII Bus Master Device Drivers
CD-ROMs Microsoft Windows 95 package
3.5” Diskette Microsoft Setup Boot Disk
3.5” Diskette Philips Ethernet Link Driver
3.5” Diskettes Philips WGE10 Utilities (2 disks)
Motherboard documentation
D Accessory pack 002 351 740 051:
Locking tool for sub-panels
Panel keys
BNC T-type connector, 50 ohms
BNC terminator, 50 ohms
Pushbutton inlay sets
2 Fuses ATC-7 1/2
2 Fuses ATC-5
12 caps for sub-panels locking holes
Box 3 - All-in-one mounting frame (optional)
Box 3 contents the following parts:
D All-in-one mounting frame
D Fastening screws
4.2 MECHANICAL DIMENSIONS
The figures on the next pages shows all mechanical dimensions of the control pan-
els which are relevant for installation in a master control desk.
The size of the desk cutout is also indicated.