HEIDENHAIN TNC 122 Technical Manual - Manual (Page 41)

40
TNC 122 11 Machine Parameters 4/97
Machine
Parameter Function and input Input value
MP1330.0-2 Feed rate for crossing over the reference marks
Input values: 80 to 30 000 [mm/min]
MP1340.0-2 Sequence of axes for crossing over the
reference marks
Input values: 0 to 3
0 = no reference mark evaluation
1 = Axis X
2 = Axis Y
3 = Axis Z
MP1350.0-2 Type of referencing
Input values: 0 or 1
0 = encoder with distance-coded reference
marks
1 = encoder with one reference mark
MP1720 Position monitoring with servo lag
(EMERGENCY OFF)
Input values: 0 to 200 [mm]
MP1810.0-2 k
v
factor for operation with servo lag
Input values: 0.1 to 10 [1/min]
MP1820 Multiplication factor for the k
v
factor
Input values: 0.001 to 9
MP1830 Characteristic kink for the k
v
factor
Input values: 0 to 100 [%]
MP1850 Factor for internal servo-lag adjustment with
external rapid traverse voltage
Input values: 0 to 65535 Only if MP80 = 1