HEIDENHAIN ND 100 User Manual - Manual (Page 28)

28 1 Operation
1
.2 Basic F
unctions
MinMax Collects and stores
minimum and maximum
values until the finish key
is pressed.
Preset Sets the position of one or
more axes to specified
values.
Preset! Recalls the last preset
position.
Prt RS Sends current data to the
RS-232 port.
Send 2 Sends current X, Y data to a
computer.
Send 3 Sends current X, Y, Z/Q
data to a computer.
Send D Sends current diameter to
a computer.
Send F Sends current form error to
a computer.
Send L Sends current distance to a
computer.
Send Q Sends current Q-axis value
to a computer.
Send r Sends current radius to a
computer.
Send X Sends current X-axis value
to a computer.
Send Y Sends current Y-axis value
to a computer.
Send Z Sends current Z-axis value
to a computer.
Send < Sends current angle to a
computer.
Zero 2 Zeros X and Y axes.
Zero Q Zeros Q-axis protractor
value.
EXTRA menu EXTRA functions