Highlighting nc blocks in the graphics, Block number display on/off, Erase the graphic – HEIDENHAIN iTNC 530 (340 49x-03) ISO programming User Manual
Page 144: 6 3-d line gr aphics (fcl 2 f u nction)
144
4 Fundamentals of NC, File Management, Programming Aids, Pallet Management
4.6 3-D Line Gr
aphics (FCL
2 F
u
nction)
Highlighting NC blocks in the graphics
8
Shift the soft-key row.
8
To highlight the NC block selected in the left window
in the 3-D line graphics in the right window, set the
MARK THIS ELEMENT OFF / ON soft key to ON.
8
To not highlight the NC block selected in the left
window in the 3-D line graphics in the right window,
set the MARK THIS ELEMENT OFF / ON soft key to
OFF.
Block number display ON/OFF
8
Shift the soft-key row.
8
To show block numbers: Set the SHOW OMIT BLOCK
NR. soft key to SHOW.
8
To omit block numbers: Set the SHOW OMIT BLOCK
NR. soft key to OMIT.
Erase the graphic
8
Shift the soft-key row.
8
Delete graphic: Press CLEAR GRAPHIC soft key.