2 manual operation and setup, Manual operation and setup – HEIDENHAIN iTNC 530 (340 49x-04) User Manual
Page 22
22
2.1 Switch-On, Switch-Off ..... 68
2.2 Moving the Machine Axes ..... 71
To traverse with the machine axis direction buttons: ..... 71
Incremental jog positioning ..... 72
Traversing with the HR 410 electronic handwheel ..... 73
HR 420 electronic handwheel ..... 74
2.3 Spindle Speed S, Feed Rate F and Miscellaneous Functions M ..... 80
Changing the spindle speed and feed rate ..... 81
2.4 Datum Setting (Without a 3-D Touch Probe) ..... 82
Datum setting with axis keys ..... 83
Datum management with the preset table ..... 84
2.5 Tilting the Working Plane (Software Option 1) ..... 91
Application, function ..... 91
Traversing the reference points in tilted axes ..... 92
Setting the datum in a tilted coordinate system ..... 93
Datum setting on machines with rotary tables ..... 93
Datum setting on machines with spindle-head changing systems ..... 94
Position display in a tilted system ..... 94
Limitations on working with the tilting function ..... 94
Activating manual tilting ..... 95
Setting the current tool-axis direction as the active machining direction (FCL 2 function) ..... 96
2.6 Dynamic Collision Monitoring (Software Option) ..... 97
Collision monitoring in the manual operating modes ..... 98