HEIDENHAIN 530 (340 49x-07) Cycle programming - Manual (Page 74)

74 Fixed Cycles: Drilling
3.1 F
undamentals
3.1 Fundamentals
Overview
The TNC offers 9 cycles for all types of drilling operations:
Cycle Soft key Page
240 CENTERING
With automatic pre-positioning, 2nd
set-up clearance, optional entry of the
centering diameter or centering depth Page 75
200 DRILLING
With automatic pre-positioning,
2nd set-up clearance Page 77
201 REAMING
With automatic pre-positioning,
2nd set-up clearance Page 79
202 BORING
With automatic pre-positioning,
2nd set-up clearance Page 81
203 UNIVERSAL DRILLING
With automatic pre-positioning,
2nd set-up clearance, chip breaking,
and decrementing Page 85
204 BACK BORING
With automatic pre-positioning,
2nd set-up clearance Page 89
205 UNIVERSAL PECKING
With automatic pre-positioning,
2nd set-up clearance, chip breaking,
and advanced stop distance Page 93
208 BORE MILLING
With automatic pre-positioning,
2nd set-up clearance Page 97
241 SINGLE-LIP DEEP-HOLE
DRILLING
With automatic pre-positioning to
deepened starting point, shaft speed
and coolant definition Page 100