HEIDENHAIN iTNC 530 (606 42x-01) - Manual (Page 488)

488 Programming: Multiple Axis Machining
12.6 Thr
ee-Dimensional T
ool Compensation (Sof
tw
ar
e Option 2)
There are two ways to define the tool orientation:
„ In an LN block with the components TX, TY and TZ
„ In an L block by indicating the coordinates of the rotary axes
Example: Block format with tool orientation
Example: Block format with rotary axes
1 LN X+31,737 Y+21,954 Z+33,165 TX+0,0078922 TY–0,8764339
TZ+0,2590319 RR F1000 M128
LN : Straight line with 3-D compensation
X, Y, Z : Compensated coordinates of the straight-line end point
TX, TY, TZ : Components of the normalized vector for workpiece
orientation
RR : Tool radius compensation
F : Feed rate
M : Miscellaneous function
1 L X+31,737 Y+21,954 Z+33,165 B+12,357 C+5,896 RL F1000
M128
L : Straight line
X, Y, Z : Compensated coordinates of the straight-line end point
L : Straight line
B, C : Coordinates of the rotary axes for tool orientation
RL : Radius compensation
F : Feed rate
M : Miscellaneous function