HEIDENHAIN TNC 640 (34059x-02) Cycle programming - Manual (Page 280)

Cycles: Turning
13.1 Turning Cycles (software option 50)
13
280
TNC 640 | User's Manual Cycle Programming | 5/2013
13.1 Turning Cycles (software option 50)
Overview
Defining turning cycles:
The soft-key row shows the available groups of cycles
Select the menu for cycle group
TURNING
Select cycle group, e.g. cycles for longitudinal turning
Select cycle, e.g. TURN SHOULDER, LONGITUDINAL
The TNC offers the following cycles for turning operations:
Cycle group Cycle Soft key Page
Special Cycles
ADAPT ROTARY COORDINATE SYSTEM(Cycle 800,
DIN/ISO: G800) 286
RESET ROTARY COORDINATE SYSTEM (Cycle 801,
DIN/ISO: G801) 288
Cycles for longitudinal
turning 289
TURN SHOULDER LONGITUDINAL (Cycle 811,
DIN/ISO: G811) 290
TURN SHOULDER LONGITUDINAL EXTENDED
(Cycle 812, DIN/ISO: G812) 292
TURN, LONGITUDINAL PLUNGE (Cycle 813, DIN/
ISO: G813) 296
TURN, LONGITUDINAL PLUNGE EXTENDED
(Cycle 814, DIN/ISO: G814) 299
TURN CONTOUR LONGITUDINAL (Cycle 810, DIN/
ISO: G810) 303
TURN CONTOUR-PARALLEL (Cycle 815, DIN/ISO:
G815) 307