HEIDENHAIN TNC 640 (34059x-04) Cycle programming User Manual
Page 515
MEASURE INSIDE WIDTH (Cycle 425, DIN/ISO: G425) 17.9
17
TNC 640 | User's Manual Cycle Programming | 3/2014
515
Tool for monitoring Q330: Definition of whether
the TNC is to monitor the tool (see "Tool
monitoring", page 494). Input range 0 to 32767.9,
alternatively tool name with maximum of 16
characters
0
: Monitoring inactive
> 0
: Tool number in the tool table TOOL.T
Set-up clearance Q320 (incremental): Additional
distance between measuring point and ball tip.
Q320 is added to
SET_UP (touch probe table), and
is only effective when the datum is probed in the
touch probe axis. Input range 0 to 99999.9999
Traversing to clearance height Q301: definition
of how the touch probe is to move between the
measuring points:
0
: Move at measuring height between measuring
points
1
: Move at clearance height between measuring
points