SMA SUNNY DESIGN 3 - Manual (Page 12)

4 User Interface SMA Solar Technology AG
12 SD3-SDW-BA-en-20 User Manual
4.3 Project Tree
The project tree displays important project information, provides quick access to functions and enables navigation
between the individual elements of the project.
Figure 3: Project tree (example)
Project Tree Symbols
Status Symbols of the Elements in the Project Tree
Functions in the Project Tree
If you select an element in the project tree, a menu is displayed where you can rename, delete or duplicate the element,
for example. You can also remove elements from a subproject or copy them to a different subproject.
Position Designation Explanation
A Navigation area On the project page Configure PV System, the planned PV system is
displayed in the navigation area in the form of a project tree.
Symbol Designation Explanation
Project A project is always present as the top element in a project tree.
Subproject Subprojects are elements of a project. There is always at least one
subproject present in a project.
PV array PV arrays are elements of subprojects.
*
* Example symbol; the relevant inverter is shown in each case.
Inverter Inverters are elements of subprojects. An inverter is assigned to one or
more PV arrays, depending on whether it is a string inverter or a multi-string
inverter.
Symbol Explanation
Element in progress
Element completed
Observe information on element
Error during element configuration - check element configuration.
Warning - check element configuration.