Yaskawa AC Servo Drives Sigma II Series INDEXER - Manual (Page 10)

E-8
1 PARTS
The NS600/NS601 parts names are as follows:
2 CHECKING ON DELIVERY
Serial Communications Connector (CN6) :
Connector for serial communications
Rotary Switch (ADRS): Used to set the station address.
I/OConnector (CN4): Connector for external I/Osignals
LED (STS): Module Status LED
Serial Communications Connector (CN7):
Used to communicate with the Setup Tool.
Ground Wire: Connect to the terminal marked “G”
on the SGDH SERVOPACK.
• When SGDH SERVOPACK is used with an NS600/NS601 mounted, the parameters are auto-
matically set so that the NS600/NS601 can be operated from the first power on.
For details of parameter setting methods, refer to the “ Σ-II Series SGM H/SGDH User’s Manual ”
(SIEPS80000005).
CAUTION