Yaskawa DS387 User Manual
Yaskawa Equipment
Yaskawa Electric America, Inc-www.drives.com
02Y00025-0296 Page 1 OF 14
REL. 08/23/91
For GPD 515/G5, GPD 503
Adjustable Frequency Drives
and VCD 703 Vector Control Drives
ANALOG SPEED REFERENCE (BIPOLAR) (AI-14B)
MODEL DS387
Before installing this option, a TECHNICALLY QUALIFIED INDIVIDUAL, who is familiar with this type of
equipment and hazards involved, should READ this ENTIRE INSTRUCTION SHEET.
IMPORTANT
This option may have been installed by the factory. However, certain steps can
only be completed at the installation site. Therefore, review and then perform
those steps which complete the installation process.
If you are installing this option in a:
Use Section:
GPD 515/G5 ...................................... A (Sheet 2)
VCD 703 ............................................ B (Sheet 7)
GPD 503 ........................................... C (Sheet 11)
CAUTION
THIS OPTION CONTAINS ELECTROSTATIC SENSITIVE DEVICES. PERSONEL
SHOULD BE GROUNDED BEFORE REMOVING CONTENTS FROM THE
CARTON AND INSTALLING INTO THE EQUIPMENT.
WARNING
HAZARDOUS VOLTAGE CAN CAUSE SEVERE INJURY OR DEATH.
LOCK ALL POWER SOURCES FEEDING DRIVE IN "OFF" POSITION.