Epson 900 - Manual (Page 42)

Removing and Replacing
the Keyboard
You need to remove the keyboard to install
memory. However, you don’t need to
disconnect the keyboard cables.
Removing the Keyboard
Follow these steps to remove the keyboard
1. Turn off the computer and disconnect the
AC power adapter.
2. Disconnect any attached external devices
and cables.
3. Open the screen as wide as you can.
4. Remove the plastic caps on both sides of
the case below the screen. Use a small
screwdriver to pry each cap loose and
then slide it off, as shown.
Upgrading Internal Components 5-7