Epson 900 - Manual (Page 76)

If this does not work, turn off the
computer, wait 30 seconds, and turn it
back on.
Your Password Isn’t Working
If you type the password and then see the
password prompt again, type the
password again and press Enter.
If the computer locks up, turn it off and
wait 30 seconds before you turn it on and
try again.
Make sure the Num Lock and Caps Lock
keys are in the same state as when you
created the password.
If you have forgotten your password, call
the EPSON Connection for assistance.
You Can’t Access Data on a Diskette
I Remove the diskette and insert it again,
making sure the label is facing up.
I Make sure the diskette is either 720KB or
1.44MB.
I If the write-protect switch is set and you
are trying to save a file to the diskette,
either use a different diskette, or move the
write-protect switch.
7-10 Troubleshooting