Epson 900 - Manual (Page 88)

Interfaces
External
video Auto-sensing, 15-pin, D-sub,
female connector for analog
monitor; supports
simultaneous display with
LCD using
Fn F10
hot key
sequence or software
command
Parallel Centronics® compatible;
25-pin, D-sub, female
connector; bidirectional 8-bit
parallel; autodetects ECP or
EPP devices when connected
and turned on at system
start-up
Serial RS-232C, 16CSSOC-compatible
programmable, asynchronous
9-pin,
D-sub
male connector
External
keyboard/mouse
Auto-sensing, 6-pin, mini-DIN
connector for a PS/2-type
external keyboard, keypad or
pointing device
Infrared IrDA-compliant interface; up
to 115.2 kbits/second up to a
distance of 1 meter (3.3 feet)
within a 30 degree viewing
angle. The IrDA Interface can
be set up to use COM1(3F8h) or
COM2 (2F8h) addresses or can
be
disabled using
Setup
Speaker Internal; automatically
disabled when line-out is used
Specifications A-3