Epson 900 - Manual (Page 60)

Setting a Password
Follow these steps to set a password
1.
2.
3.
4.
5.
6.
7.
Highlight the Password option.
Press Enter.
Type a password up to seven characters
long. As you type, you see
only symbols
displayed on the screen. Note whether
Num Lock and Caps Lock are on when
you type your password.
Press Enter.
Type the password again and press Enter.
(If you enter an incorrect password, you
must start the process over again. Keep
trying until you have entered the
password correctly twice in a row.)
Press any key to continue. The Password
option setting is enabled
You can now highlight the Security option
and select
SETUP
,
which applies the
password to the Setup program. You can
also select SYSTEM. If you select
SYSTEM,
you are prompted to enter the password
whenever you turn on the computer or
run Setup.
6-12 Customizing
Your Computer