LinPlug Octopus - Manual (Page 40)

Step Sequencer
The Octopus features two identical Step Sequencers. These allow you to
create patterns of notes that are played back as part of the current preset.
The Step Sequencers are located at the lower edge of the instrument's front
panel.
Each Step Sequencer contains the following controls: Seq 1/Seq 2, Menu,
Steps, Shuffle, Transpose, Pattern Display, Random and Ping Pong. These
controls are described below. Note that each Step Sequencer is identical so
only one will be described in this manual. Also note that each pattern is
considered to be part of the preset, so that if you change presets and the
pattern has not been saved with the preset, then it will be lost.
Seq 1/Seq 2
The Seq 1/Seq 2 buttons are located at the top left of each Step Sequencer
module. Clicking on these buttons turns the respective Step Sequencer on
or off.
38 Manual