LinPlug RMV - Manual (Page 20)

Pads
When a new Pad is selected, the RMV's display is updated so that it shows the Audio
Module and the signal processing path of the currently active Pad.
The 48 Pads found in the instrument's 3 Pad sections can be used to trigger any one of
the RMV's selection of Audio modules. The modules that use percussion synthesis
algorithms to generate sound are described in more detail in the Percussion Synthesis
Module section of this manual. One of the Audio modules uses sampling to playback
sounds. This module is described in the Sample Module section of this guide.
An Audio module is assigned to a Pad using the Module control located directly above the
Audio module section. To do this, first, select the desired Pad, and then select one of the
RMV's Audio modules from the drop-down list. The selected module is now assigned to
the Pad. Note that the number of the currently active Pad is shown in the Pad control
which is located to the left of the Module control. It is also possible to change Pads by
clicking and dragging on the Module control.
LinPlug Reference Manual 5.0.1 20