LinPlug RMV User Manual
Page 21
Pads
Each Pad in the RMV's 3 Pad sections is identical and consists of 19 controls. These are:
E, M, L, G, Title, Pan, Trigger Note, Out(put), Trigger Button, Mute, Solo, Tune, Vol(ume),
Snd1 (Effects Send 1), Snd2 (Effects Send 2), Choke, Voices, Pad and Module. These
described in detail below. The first fifteen controls are located on the Pad itself. The other
four controls are located above the Audio Module section.
E (Edit):
The E (Edit) Indicator (the small light at the top left of each Pad
section) shows the Pad that is currently active. A different Pad can be
selected by clicking any control in the desired Pad.
M (Menu):
The M (Menu) control is used to open a popup menu containing 4
items related to the Pad's settings. These items are: Save, Copy, and
Paste. The Save menu item enables the current Pad settings to be
saved to a .PAD file. The file is saved to the RMV's internal Pad
library. The Copy menu item enables the current Pad settings to be
copied, while the Paste menu item enables the copied settings of
another Pad to be applied to the current Pad.
L (Load):
Clicking on the L (Load) button opens the Pad Librarian. The Pad
Librarian enables Pads to be loaded and saved. See below for more
information about the Pad Librarian.
G (Group):
Each of the RMV's Pads can be assigned to a Group. Assigning a
Pad to a Group enables all Pads in that Group to be edited using the
controls of a single Pad. To set a Pad to a Group, click and drag on
the G (Group) button until the desired Group is displayed. Ten
Groups are available. Note that Group editing is relative which
means that if the value of one control in a Group is changed, the
other controls in the Group are changed by the same amount. They
are not set to the same value as the first control.
Attention: to change all Pads in a Group, use the right mouse button.
With the left mouse button you only change the current Pad, even
when it has been assigned to a group!
Title:
A Pad's settings can be named using the Title control which is
located below the E, M, L and G controls. The name of the Pad is
saved with the Kit that it is a part of.
Data Display:
Each Pad has its own Data Display that shows the value of the
parameter currently being edited. For example, if the value of the
Amplitude Envelope's Attack Time is changed, the value is displayed
in the current Pad's Data Display.
Pan:
The Pan control is used to set the stereo position of the Pad's output
and is located below the Pad's Data Display. The Pan control has a
range of 1.00 L to 1.00 R. A setting of "C" places the output in the
LinPlug
Reference Manual 5.0.1
21