Magnum Energy Mini Magnum Panel (MMP Series) - Manual (Page 12)

Page 3
©
2013 Magnum Energy, Inc.
Introduction
1.2 MMP External Components
As shown in Figure 1-1, the main components found on the outside of the MMP enclosure are:
1
Remote Blank Plate – This plate is removed when an optional ME-RC or ME-ARC
remote control is installed.
2
Conduit Knockouts – Knockouts to allow metal and PVC conduits. For dimensions and
sizes see Figure 2-2.
3
Knockout Panels – Eight 1/2” rectangular knockout panels provided to install additional
DC circuit breakers.
4
Front Cover – The front cover is removed to allow access to the internal components.
Four #10 x 3/8”, T25 Torx drive screws are used to hold the front cover to the enclosure.
Figure 1-1, MMP’s Outside Components
4
2
1
3