Magnum Energy Mini Magnum Panel (MMP Series) - Manual (Page 29)

©
2013 Magnum Energy, Inc. Page 20
Installation
DC System Grounding point
[Electrode Conductor
(i.e., ground busbar)]
Magnum Inverter
(front view)
Battery Temp Sensor Cable*
Inverter’s DC Negative Busbar
Inverter’s DC Positive Busbar
Inverter’s Equipment Ground Wire
BTS
BTS
* If the voltage inside the enclosure is
greater than 150 volts (i.e., 120/240
VAC source/inverter), use the provided
extension cable (with 300-volt rated
insulation) to connect the BTS cable
Battery Bank
Battery Bank’s Equipment Ground Wire
Battery Bank’s Negative Cable
Battery Bank’s Positive Cable
Magnum Inverter/Charger
Figure 2-8, DC Wiring with Magnum Inverter