Casio EX-FC500S - Manual (Page 166)

166
Using the Camera to Record and Analyze a Golf Swing
7.
Use [8], [2], [4], and [6] to align the
reference point on the green line with the
center of the ball. Next, rotate the zoom
controller to align the green line with the path
of the golf club.
• You can also change the angle of the green line by
rotating the function ring.
• Changing the angle of the green line will cause the
displayed angle of inclination (yellow part) and the green angle value to change
accordingly.
8.
Press [MODE].
This starts playback so you can check the path of the club head during impact.
• You can create a new movie file with the guidelines built into the moment of
impact movie by pressing [SET] during movie playback to pause it, and then
pressing [0] (Movie).
IMPORTANT!
• When you display lines in a movie recorded with this camera, positions of the lines
will be recorded in the movie data. This means that any time you play back the
movie, you can toggle display of the guide show and hide by pressing [8] (DISP).
You can also press [MODE] and reposition the lines, if you want.
Reference point