Casio EX-FC500S - Manual (Page 41)

41
Snapshot Tutorial
2.
Use [8] and [2] to select the setting you want to change, and use [4]
and [6] to select the setting you want.
This will select one of the Control Panel icons and display its settings.*
3.
After the setting is the way you want, press [SET].
This will apply the setting and return to the REC mode.
NOTE
• You also can use on-screen menus to configure settings other than those listed
above (page 99).
Using the Control Panel
The Control Panel can be used to configure camera
settings.
1.
In the REC mode, press [SET].
• You can also display the Control Panel by
pressing [2].
1 Self-timer (page 42)
2 White balance (page 43)
3 Focus (page 45)
4 ISO sensitivity (page 47)
5 Make-up (page 48)
6 EV shift (page 49)
7 Flash (page 50)
8 Metering (page 52)
* Items displayed in the Control Panel depend on the recording mode.
[SET]
[8] [2] [4] [6]
1
5
3
4
7
8
2
6
Control Panel