Casio EX-FC500S - Manual (Page 69)

69
Snapshot Tutorial
NOTE
• Depending on the “ART SHOT” scenes, some of the items on the menu that
appears may not be usable.
• With this “ART SHOT” scene, the flash setting automatically becomes ? (Flash
Off).
• Movie recording is disabled while “Sparkling Shot” or “ART SHOT Bracketing” is
selected.
• After shooting an image with “ART SHOT Bracketing”, you will not be able to shoot
another image until save of the previous image is complete.
• With HDR Art Movie, the “Movie Quality” setting can be either “HD” or “STD” only
(page 105). When any “Movie Quality” setting other than “STD” is selected in
another mode, the “HD” setting is used when shooting with HDR Art Movie.
• When using “HDR Art” for movie recording, the intensity of the art effect is fixed in
accordance with movie settings.
You can configure the camera to save two images when shooting with HDR Art: one
image with HDR Art effects applied in accordance with the scene you selected plus
another normal (Program Auto) image without any effects applied.
1.
In the REC mode, press [MODE].
2.
Use [8], [2], [4], and [6] to select “¹” (ART SHOT), and then press
[SET].
3.
Press [MENU].
4.
Press [4], use [8] and [2] to select the “r REC MENU” tab, and then
press [6].
5.
Use [8] and [2] to select “Double (HDR Art)” and then press [SET].
6.
Use [8] and [2] to select “On” and then press [SET].
While “Off” is selected for the above step, only a single HDR Art image is saved
(normal image not saved).
7.
Press the shutter button to shoot.
Saving a Second Normal Image When Shooting With HDR Art
(Double (HDR Art))