Edelbrock 3550 - Manual (Page 34)

34
Pro-Flo EFI Installation Instructions
©2005 Edelbrock Corporation
Brochure No. 63-0115 Rev. 10/05
( 1) Hall effect sensor
( 1) Ignition Amplifier
( 1) Manifold Absolute Pressure sensor
( 1) Manifold Air Temperature sensor
( 1) Coolant Temperature sensor
( 1) Throttle Position sensor
( 1) Oxygen (O
2
) sensor
( 1) High pressure fuel pump
( 1) Fuel filter
( 1) Fuel pressure regulator
( 1) Fuel injectors
( 1) Idle Air Control solenoid
( 1) Main system harness
( 1) Fuel pump wire harness
( 1) Shutter wheel spacer
(12) Fuel line tie wraps
( 1) Fuel pump relay
( 1) 3 amp fuse
( 1) 20 amp fuse
( 1) 5-inch cross tube
( 1) 2-inch cross tube
( 1) Intake manifold
( 1) Shutter wheel
( 1) MAP Sensor bracket
( 2) Fuel rail
( 1) Return line O-ring tube
( 1) Throttle body air valve
( 4) Cross tube clamp
( 1) Mechanical advance lockout plate
( 8) Fuel filter clamp
( 1) 5/16-inch hose to 1/4-inch pipe fitting
( 1) 1/8-inch pipe to 1/4-inch hose fitting
( 1) 1/4-inch pipe to 3/8-inch hose fitting
( 1) Regulator/rail adapter
( 1) Return line adapter
( 2) 3/16-inch washer
( 1) Air valve/manifold gasket
( 8) 3/8-inch fuel line
(15) 11/32-inch PCV hose
( 8) 5/16-inch rubber fuel line
( 1) Pressure regulator shim
( 2) Shutter wheel shims
( 2) 10-32 nut
( 4) 5/16 24 hex nut
( 1) Wiring harness cover plate
( 2) #10 internal star lock washer
( 2) 1/4-inch pipe plug hex c/s dryseal
( 2) 5mm x 25 hex head cap screw
( 4) 5mm x 10 hex head cap screw
( 1) 8-32 x 0.25 allen head screw
( 2) 10-32 x 0.75 round head m/s screw
( 1) 5mm x 0.8 x 30mm hex head m/s screw
( 2) 10-32 x 1.50 Fillister head screw
( 4) 5/16-18 x 1 socket head cap screw
( 1) PCV valve
( 1) Std. 1/4-inch Schrader valve
( 5) Cross tube O-ring
( 1) Regulator adapter tube
( 4) 5/16-inch star washer internal
( 2) O-ring
( 4) 5/16 x 1/2 carb stud
COMPLETE PRO-FLO SYSTEM PARTS