Extron Electronics MAV Plus Series - Manual (Page 5)

Quick Start — CrossPoint 450 Plus
and MAV Plus Switchers, Cont’d
On audio models , the output buttons also
display the selected input’s audio level.
On audio models , the input buttons also
display the selected output’s volume level.
Enter button saves changes.
Preset button saves a configuration as a preset or
recalls a previously-defined preset.
View button selects a view-only mode that
prevents inadvertent configuration changes.
On audio models, View decrements the level
and volume. See “View, adjust the audio level”.
Esc button cancels selections in progress and
resets the front panel button indications. The
Esc button does not reset: the current
configuration, the RGBHV or video and audio
selection, any presets, or any audio level or
volume settings. On audio models, Esc
increments the level and volume. See “View,
adjust the audio level”.
RGBHV (CrossPoint 450 Plus)/Video (MAV Plus)
and Audio buttons select/deselect video
and/or audio. The Audio button blinks to
indicate audio breakaway. The Audio button
also selects the audio level/adjust mode. See
“View, adjust the audio level”.
Create a tie
1 . Press and release the RGBHV/Video and/or
Audio I/O button(s) to select or deselect
video and/or audio as desired.
2 . Press and release the desired input button.
3 . Press and release the desired output button(s).
4 . Press and release the Enter button.
Save or recall a preset
1 . Save a preset — Press and hold the Preset
button for 2 seconds.
Recall a preset — Press and release the Preset
button.
2 . Press and release the desired input or output
button.
3 . Press and release the Enter button.
View, adjust the audio level
1 . Press and hold the
Audio button.
2 . Press an input or
output button. See
chapter 3 to read the displayed value.
3 . Increase and
decrease the gain/
attenuation or
volume level by pressing
the Esc (
) and View ( )
buttons.
4 . Press and release the
Audio button to exit.
Green when selected.
Off when deselected. Red when selected.
Off when deselected.
I / O
RGBHV AUDIO
The button lights to indicate the selection.
5
3 4
ENTER
8
Amber indicates RGBHV/video and audio tie.
Green indicates RGBHV/video only tie.
Red indicates audio only tie.
Green indicates the need
to confirm the change.
PRESET PRESET
PRESET PRESET
Preset button blinks.
Press and hold.
2 seconds
Save a
preset
Recall a
preset
Preset button lights.
Press and release.
1 2 3 4 5 6
17 18 19 20 21 22
• All input and output buttons with
assigned presets light red.
• The configuration data at assigned
preset locations will be overwritten.
1 ENTER
The button blinks red to indicate that
this preset is selected to save or recall.
The Enter button blinks
red to indicate the need to
activate the save or recall.
AUDIO AUDIO
Audio button blinks. Press and
Hold
2 seconds
17 18
1 2
5
Press an Input button to adjust gain/attenuation.
Press an Output button to adjust volume.
Output buttons display gain/attenuation.
Input buttons display volume.
1 Lit button Unlit button 1
ESC VIEW
View button
decreases the
level or volume. Esc button
increases the
level or volume.