Extron Electronics MAV Plus Series User Manual
Page 68
3-25
CrossPoint 450 Plus and MAV Plus Switchers • Operation
6
.
Press and release the input 5 through 8 and output 5 through 8 buttons
(figure 3-35).
1
2
3
4
5
6
7
8 15 16
17 18 19 20 21 22 23 24 25 32
1
2
3
4
5
6
7
8 15 16
17 18 19 20 21 22 23 24 25 32
I
N
P
U
T
S
O
U
T
P
U
T
S
Press and release the Input 5 through Input 8 buttons.
The selected buttons light.
Press and release the Output 5 through Output 8 buttons.
The selected buttons light.
Figure 3-35 — Assign inputs and outputs
7
.
Press and release the RGBHV (CrossPoint 450 Plus switchers) or Video (MAV
Plus switchers) button and the Audio button until the buttons light
(figure 3-36). The switcher exits I/O Group mode.
I / O
RGBHV
AUDIO
Press and release both buttons.
Figure 3-36 — Exit I/O Group mode
As an alternative, do nothing for approximately 30 seconds. The front panel
times out and the switcher exits I/O Group mode.
•
Group 1 consists of inputs 1 through 4 and outputs 1 through 4.
•
Group 2 consists of inputs 5 through 8 and outputs 5 through 8.