Sealey AK9636D User Manual
Safety instructions, Introduction & specification
INSTRUCTIONS FOR
ELECTRONIC DIGITAL HEIGHT GAUGE
MODEL No:
AK9636D.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these
instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS, AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE,
FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
WARNING! Ensure Health and Safety, local authority and general workshop practice regulations
are adhered to when using tools and equipment.
CAUTION! Some edges, in particular the scribe are sharp and caution should be used when
handling, store safely in the storage case when not in use.
✗
DO NOT use the gauge if damaged.
✓
Maintain the gauge in good and clean condition for best and safest performance.
✓
Keep the work area clean, uncluttered and ensure there is adequate lighting.
✓
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
✓
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery. Contain or tie back long
hair.
✓
Keep children and unauthorised persons away from the work area.
1. SAFETY INSTRUCTIONS
2. INTRODUCTION & SPECIFICATION
Precision ground base with 6 button electronic gauge. Includes fine adjustment control carriage for accurate
use. 6-Digit LCD read-out displays in metric or imperial. Supplied with scriber foot and clamp. Powered by
CR2032 battery (included) and supplied with storage case.
1 Power switch
2 mm / inch selection
3 Relative / Absolute
4 Zero setting button
5 + preset button
6 - preset button
A Scale
B Beam
C Fine adjustment
D LCD Display
E Fastening Screw
F Battery lid
G Base
H Scribe
Operating temperature: 0 - 40ºC
Storage temperature: -20 - 70ºC
Max. relative humidity: 80%
Fig 1
1
6
5
2
4
A
B
C
D
E
F
G
H
3
Measuring range: 0 - 300mm / 0 - 12in
Accuracy:
0.03mm / 0.0012in
Resolution:
0.01mm / 0.0001in
Repeatability:
0.01mm / 0.0005in
AK9636D.V2 ISSUE No.1 - 20/02/09