Edelbrock 3530 - Manual (Page 2)

2
Pro-Flo EFI Installation Instructions ©2005 Edelbrock Corporation
Rev. 2/05
Brochure #63-0273
Catalog #3530 & #3531
COMPONENTS
❑ Electronic Control Unit/System ECU
❑ Calibration Module
❑ Distributor
❑ Ignition Amplifier
❑ ECU Power Relay/Fuel Pump Relay
❑ Manifold Absolute Pressure (MAP) Sensor
❑ Manifold Air Temperature (MAT) Sensor
❑ Coolant Temperature Sensor (CTS)
❑ Throttle Position Sensor (TPS), integrated with air valve
❑ Oxygen (O
2
) sensor
❑ High Pressure Fuel Pump
❑ Fuel Filter
❑ Fuel Rail Assembly
❑ Fuel Pressure Regulator
❑ Fuel Injectors
❑ Intake Manifold
❑ Four-Barrel Air Valve
❑ Idle Air Control (IAC) Solenoid, integrated with air valve
❑ Main System Harness
❑ Fuel Pump Harness
❑ Installation Package
Many Pro-Flo components, including the Manifold Absolute Pressure sensor, fuel pressure regulator, Coolant Temperature sensor,
and the fuel filter are standard OEM pieces. In the event that one of these parts needs to be replaced, you are likely to find a
replacement at your local parts supplier, in addition to your local Edelbrock dealer or directly from Edelbrock. For a list of part
numbers, refer to the PART NUMBERS section at the back of this manual.
3531 Shown