RISCO Group ProSYS, Interactive Voice Module - Manual (Page 14)

14
Voice Module Programming and Operations Manual
Playing Messages
After recording, you can verify messages by following the
procedures in this section and selecting
[1] Play
in step 4. If you use
the
[1] Play
option before recording your own messages, you hear
the system-defined description for the premises, partition or zone, as
described on page 22.
NOTE:
If the Voice module is not connected to the ProSYS Main Panel, the LCD displays the
following message in step 4 of both procedures in this section:
VOICE MODULE NOT
READY
.
Recording Utility Output (UO) Messages
*
9 CODE # 4 2 4
Utility Outputs enable you to operate and control home appliances,
such as heating, lighting, sprinkler systems and garage doors, via
your ProSYS security system.
Recording voice messages for Utility Outputs simplifies the process of
remotely operating them, as described on page 30, by enabling the
user to hear a meaningful name, such as
Heating
, for each Utility
Output.
This procedure involves:
Selecting a Utility Output voice message.
Assigning an appliance to that message.
Recording a name for the selected appliance.
NOTE:
Up to 8 appliances can be assigned to voice messages. Appliances must be defined as
Follow Code
in order for you to assign them to voice messages. Ask your installer about
defining appliances in this way.