RISCO Group ProSYS, Interactive Voice Module - Manual (Page 37)

Voice Module Programming and Operations Manual
37
Exiting the System
0
When you have finished performing remote operations, you can exit
the system, as described below.
NOTE:
You can also exit the system by hanging up. The communication is automatically
disconnected.
To exit the system:
1.
From the
Operations
menu, press 0 . The following message is
announced:
Goodbye.
2.
Hang up. All phones on the same line as the system are
effectively reconnected and can be used.
Chapter 4 Receiving Calls from
the System
Upon event occurrence, such as alarm activation, the Voice
module informs you of security situations such as intrusion or fire,
by calling you and announcing a pre-recorded Event
announcement message, as described on page 10, followed by
the
Acknowledge
menu, as described on page 39.
The system can call up to 16 Follow Me numbers, depending on
your system, enabling you, a relative or neighbor to be informed
of the security situation.
NOTES:
ProSYS 16 and 40 systems can call up to 8 FM numbers.
ProSYS 128 systems can call up to 16 FM numbers.
FM numbers are assigned certain events and partitions for which they receive calls.
The system must be programmed to call an FM number after a specific event
occurs in order for that event to trigger the call. See page 31 for more information
about FM numbers.
You can then take the appropriate action, whether this is to
inform the authorities, or to use the Voice module to
acknowledge the event and remotely operate the system, as
described in this chapter.