RISCO Group ProSYS, Interactive Voice Module - Manual (Page 9)

Voice Module Programming and Operations Manual
9
Chapter 2: Programming the Voice
Module
This chapter describes how to customize the spoken messages that
the Voice module announces when you access the system from a
remote telephone or you hear on the premises MBUs, enabling these
messages to be immediately and easily understood.
In addition, this chapter describes how to verify the communication
between the Voice module and the ProSYS, and how to enable
Announcement messages to be sounded from MBUs at the
premises.
All procedures in this chapter are performed from the Voice
Message menu, which is accessed from the ProSYS keypad, as
described in the ProSYS User's Manual, Chapter 12: Complete Menu
of User Functions .
NOTE:
Only installers and users with the Grand Master authority level can program the Voice
module.
This chapter includes the following sections:
*
9 CODE # 4 1 Selecting a Message Structure , page 11
*
9 CODE # 4 2
Recording and Playing Messages , page 12
*
9 CODE # 4 3 Verifying Communication , page 16
*
9 CODE # 4 4
Enabling and Disabling Announcement
Messages , page 18