RISCO Group ProSYS, Interactive Voice Module - Manual (Page 34)

34
Voice Module Programming and Operations Manual
Listening and Talking
6
The Listen and Talk option enables you to remotely and silently listen
in to your premises in order to verify the cause of an event
occurrence through the MBU units. It also enables you to remotely
talk into your premises, for example, to guide someone in distress.
NOTE:
When entering the Listen and Talk option you have 2 minutes time out in which to
listen or talk, after each press on [1] or [2] options. After this time, the
Acknowledge
menu or the
Operations
menu is repeated.
To listen and talk:
From the
Operations/Acknowledge
menu, press
6
. The
following messages are announced:
To listen in, press 1.
To talk, press 2.
To return to the previous menu, press star.
To listen:
6 1
At any time, you can press
1
to listen in to the premises. The
bell alarm is silenced. If you talk, your voice cannot be heard in
the premises.
To talk:
6 2
At any time, you can press 2 and talk into the telephone. The
bell alarm is silenced, and your voice is heard in the premises.
During this Talking mode you can’t listen-in to the premises.
NOTE:
When you switch from talk mode to listen mode, the MBUs on the premises sound a
beep and the Led is flashing slowly. This can help you to make a convenient dialog
with a person in the premises
To stop listening and talking:
Press
*
to stop listening and talking and return to the
Operations
menu.