RIGOL DM3058 - Manual (Page 55)

RIGOL
Programming Guide for DM3058/DM3058E 3-30
:MEASure:VOLTage:DC:IMPEdance 10G
7. :MEASure:VOLTage:DC:FILTer[:STATe]
Command Format:
:MEASure:VOLTage:DC:FILTer[:STATe]?
:MEASure:VOLTage:DC:FILTer[:STATe] {ON|OFF|1|0}
Function:
The commands query and set the AC filter state under current DC voltage
measurement.
Explanations:
:MEASure:VOLTage:DC:FILTer[:STATe]? – Queries the filter state.
:MEASure:VOLTage:DC:FILTer[:STATe] {ON|OFF} – Opens or closes the filter.
Return Format:
The query returns ON (1) or OFF (0).
Example:
Opens the filter.
:MEASure:VOLTage:DC:FILTer ON
8. :MEASure:VOLTage:AC?
Command Format:
:MEASure:VOLTage:AC?
Function:
The command queries the measured AC current value.
Explanations:
The command is unavailable in double-display.
Return Format:
The command queries the measured AC voltage value in scientific notation, such
as: 3.941713e-01, the unit is V.