RIGOL DM3058 - Manual (Page 89)

RIGOL
Programming Guide for DM3058/DM3058E 3-64
:UTILity:INTErface:LAN:MANUip?
:UTILity:INTErface:LAN:MANUip {ON|OFF|1|0}
Function:
The commands query and set the state of Manual IP.
Explanations:
:UTILity:INTErface:LAN:MANUip? – Queries if Manual IP is enabled.
:UTILity:INTErface:LAN:MANUip {ON|OFF|1|0} – Sets the state of Manual IP to
be used.
Return Format:
The query returns ON (1) or OFF (0).
4. :UTILity:INTErface:LAN:IP
Command Format:
:UTILity:INTErface:LAN:IP?
:UTILity:INTErface:LAN:IP <ip_address>
Function:
The commands query and set the IP address for LAN connection.
Parameter:
Name Type Range Default
<ip_address> String User-defined 168.254.0.238
Explanations:
:UTILity:INTErface:LAN:IP? – Queries the current IP address.
:UTILity:INTErface:LAN:IP <string> - Sets the IP address of the multimeter.
Parameter <ip_address> is for user-defined.
Return Format:
The query returns the current IP address.