Rugged Cams Vertex & Vertex RTH - Manual (Page 70)

69
② Direct
The administrator manages dedicated (or direct) storage devices. A dedicated (direct)
storage device stores data on the hard disk in real time. Five commands can be executed.
Depending on the S/W status, however, some commands cannot be executed.
{NEW}: Returns the status of the selected storage device to New; if this command is
executed, the selected storage device will be moved to the {New} storage device
manager
{Online}: Changes the selected storage device in online state
{Offline}: Changes the selected storage device in offline state
{Format}: Formats the selected storage
{Eject}: Separates the selected device completely from the software
※ Physical states supporting the execution of the commands above include Healthy and
Warning. In fault state, however, no command can be executed.
When removing a device installed in the DVR, USB, or storage connected to
the IEEE1394 port, the user shall execute the {Eject} command.
③ Backup
The administrator manages backup storage devices. Backup storage devices are not used
to store data; rather, they are only used to back up data. The user can execute only the
{New} command.
Depending on the storage type, the storage is used only for direct or backup
purposes.
(5) Configuration of the local storage device
① {Model}: Model name of the storage device
② {Serial}: Serial number of the storage device
③ {Location}: Physical location of the storage device
④ {Capacity (T/F)}: Storage device capacity (T: Total; F: Free)
⑤ {Status (SW/HW)}: Storage device status (SW: Software; HW: Hardware)
※
There are three software status types: