TA Triumph-Adler P-4030D - Manual (Page 175)

4-115
Operation Panel
2
Press [OK]. The Off/On screen appears.
3
Press  or  to select On or Off.
4
Press [OK]. The NW User Property menu reappears.
Authenticat Type (Authenticat type setting)
Set the authentication method.
1
In the NW User Property menu, press  or  to select
Authenticat Type.
2
Press [OK]. The Authenticat Type screen appears.
3
Press  or  to select Simple or SASL.
4
Press [OK]. The NW User Property menu reappears.
Login/Logout
Once you enable user login administration, a login user name and password entry screen appears each time you use this
machine. Enter the user information registered on the network authentication server as the login user name and password.
Register new users from the Policy Manager. For details, refer to the Policy Manager User Guide.
Login
Use the procedure below to login.
1
With the Login User Name entry field selected, press [OK]. The
Login User Name entry screen is displayed.
Off/On: a b
1 Off
********************-
2 *On
Authenticat Type: a b
********************-
2 SASL 1 *Simple
Note To carry out operations restricted in the mode selection menu operation and Lock Operation Panel settings,
it is necessary to log in as a user with administrator authority.
For the administrator settings, refer to Administrator on page 4-117.
For Lock Operation Panel, refer to Lock Operation Panel on page 2-19.
Login User Name:
O b
/******************-
Login Password:
[ Menu ] [ Login ]