TA Triumph-Adler P-4030D - Manual (Page 24)

Preparation before Use
2-2
Changing Network Interface Parameters
This printer supports TCP/IP (IPv4), TCP/IP (IPv6), IPP, SSL Server and the IPSec protocols and Security Level.
The table below shows the items required for each of the settings.
Configure the printer's network parameters as appropriate for your PC and your network environment.
Menu Submenu Setting
Network TCP/IP Settings TCP/IP On/Off
IPv4 Setting DHCP On/Off
Auto-IP On/Off
IP Address IP address
Subnet Mask IP address
Default Gateway IP address
Bonjour On/Off
IPv6 Setting TCP/IP(IPv6) On/Off
RA(Sateless) On/Off
DHCPv6 On/Off
Protocol Detail NetBEUI On/Off
SNMPv3 On/Off
FTP(Server) On/Off
SNMP On/Off
SMTP On/Off
POP3 On/Off
RAW Port On/Off
LPD On/Off
HTTP On/Off
LDAP On/Off
Restart Network Yes/No