TA Triumph-Adler DC 2018 - Manual (Page 53)

Basic Operation
OPERATION GUIDE 4-7
Print Override Mode
The print override mode temporarily stops processing of the current job to enable
copies of a more urgent job to be made.
After the print override processing is completed, the interrupted job will be resumed.
1 Press Function.
2 Press S or T to select Print Override.
3 Press Enter.
4 Press S or T to select On.
5 Press Enter.
6 Press right Select. The message display shows Completed and returns to the
Function screen.
7 Enter the desired number of copies.
8 Place the original on the platen and press Start. Completed copies are delivered to
the output tray.
9 When the interruption is completed, perform steps 1 through 4 to switch Print
Override mode Off.
2GM_UTAX_ENG_OG.book 7 ページ ２００５年３月４日 金曜日 午後９時４５分