Reinstalling the transport pin – TA Triumph-Adler DC 2018 User Manual
Page 65
Advertising
Maintenance
OPERATION GUIDE
5-5
Reinstalling the Transport Pin
Follow the instructions below to reinstall the transport pin before moving the machine
1
Access Transport mode.
If you are unsure how to use this route map refer to Accessing Menu Items on
page 3-3.
2
Press left Select on the operation panel.
3
Turn the power switch off.
4
Open the top and front cover.
5
Remove the transport pin.
6
Fasten the transport pin as shown.
7
Close the front and top cover.
System Menu/
Counter
S or T
Service Setting
Enter
S or T
Transport Mode
Enter
2GM_UTAX_ENG_OG.book 5 ページ 2005年3月4日 金曜日 午後9時45分
Advertising