TA Triumph-Adler DC 2018 - Manual (Page 56)

Basic Operation
4-10 OPERATION GUIDE
3 Press
S or T to select E-mail and press Enter.
4 Enter the destination e-mail address. Refer to Character Entry on page 3-8 for
information on entering characters.
5 Once you have completed entering the address, press Enter.
6 To enter a subject and/or message, press right Select.
If you do not need subject and message, go directly to step 10 without pressing right
Select.
Enter the subject for the e-mail when the subject input screen is displayed (60
characters maximum).
7 Press Enter. Enter the desired message for the e-mail when the message input
screen is displayed (60 characters maximum).
8 Press Enter. The Completed screen is displayed, and the message display returns
to the basic screen.
9 Place the original on the platen and press Start.
The scanned image is sent to the destination e-mail address as an attachment. The
image (PDF) is named as doc plus the date and time at which it was transmitted. For
example, a PDF attachment named doc04252005101530.pdf is a file sent on 2005
April 25th at 10:15:30.
Recipient Selection from Address Book
1 Press Send.
2 Press X.
3 Press S or T to select Address Book or Ext Address Book.
4 Press Enter.
5 Press
S or T to select a desired name.
2GM_UTAX_ENG_OG.book 10 ページ ２００５年３月４日 金曜日 午後９時４５分