TA Triumph-Adler P-3525 MFP - Manual (Page 16)

Part Names and Functions
1-2
Operation Panel
For the names of keys and indicators required when functions other than FAX are used, refer to the machine’s
Operation Guide.
Blinks when
document is
stored in memory
for a timer
transmission.
Message Display. Check what is shown
here while operating the machine.
Blinks during printing
and transmission/
reception.
Selects the menu displayed
at the lower left in the
Message Display.
Selects the menu displayed
at the lower right in the
Message Display.
Switches between on-hook and off-hook when
manually sending a FAX.
Shifts to switch the one-touch key numbers
(1 to 11 and 12 to 22).
Lamp is lit while shifted (12 to 22).
Displays the Add Destination screen, where you can add
destinations.
Displays the Confirm Destination screen, where you can edit and delete
destinations.
Calls the previous destination. Also used to enter a
pause when entering a FAX number.
Displays the Address Book screen, where you can add destinations.
Used to call destinations registered to the
one-touch key numbers (1 to 22). Also used
to register and delete call destinations.
Displays the
Copy screen.
Displays the FAX screen.
Displays the Send screen.
Displays the Document Box screen.
Displays the Status/Job Cancel screen.
Displays the System Menu/Counter
menu screen.